STIRRI-V3-TF flux is a Universal no-clean tacky solder flux used for all soldering work. Clear residue evaporates with hot air and doesn’t short components.

V3 is the most recent no-clean formulation combining the power of 559-series into a single universal REACH-compliant chemical material with optical UV-tracer and pleasant non-chemical scent. Makes soldering incredibly easy and fun , it is also non-harming to the environment or human health.

Clear residue can be easily removed with hot air, foam swab and basic Solvents, it is also non-corrosive.

Storage and Handling

STIRRI-V3-TF flux should be stored at room temperature (20-25°C). As a result refrigeration is not necessary and will not extend product shelf life.
If the material has been refrigerated – consider 3-4 hours at room temperature to fully normalize.
Syringes and cartridges are best stored vertically with tip pointing down.
Properly stored tacky flux has up to 24-month shelf life, as a result you can hold larger stock.

Safety Notice

This product is designed for a professional audience. The information contained herein is based on technical data that we believe to be reliable and is intended for use by persons having relevant skills at their own risk, all safety data should be read before use.

Cleaning

“No-clean” fluxes are easily removed using a range of Solvents in ultrasonic devices or using commercially available flux residue removers, as a result the PCB looks clean.

The post STIRRI-V3-TF Flux 5g appeared first on ElectroFixit.

ChipQuik Low Melt Solder Specs:

• Melting temperature 58°C
• Supplied as a 6.5″ (15cm) length stick
• Flux type: No Clean
• Flux classification: RELO

Also sold in a tube containing 9 x 15cm sticks.

The post ChipQuik 58°C Low Melt Solder 15cm Stick appeared first on ElectroFixit.

ChipQuik Low Melt Solder Specs:

• Melting temperature 58°C
• Supplied in a tube of 9 x 6.5″ lengths.
• Flux type: No Clean
• Flux classification: RELO

The post ChipQuik 58°C Low Melt Solder appeared first on ElectroFixit.

Includes:

• A – Philips
• B – Tri Point
• C – Pentalobe
• D – Pinhead Philips
• E – T2 Torx

Manufacturer: QianLi

The post QianLi Mega Idea iFlying 2D Screwdriver Set appeared first on ElectroFixit.

Heavy Duty 10w UV light Cures Solder mask rapidly for PCB repair.

Industrial high quality build 10W high intensity UV Curing light that can cure solder mask in 6 seconds. This Boerui UV Lamp features a Shadow less Ultra Violet light and is built from thick Aluminium steel with an LED 395NM lamp.

     UV Lamp Specs:

• Power button on top for easy access
• Handsfree operation. Set it over PCB and leave it.
• Powered Via USB. No batteries needed.
• Stand by mode with light blue Light

The post Heavy Duty 10w UV light appeared first on ElectroFixit.

Fine Tip Multimeter Probes that make light work of taking measurements on ultra small SMD components.

• Made from high quality Non Slip Ergonomic PVC Handle.
• Flexible PVC wire No Knots.
• Super fine and extra hard Gold needles for ultra precise measurements.
• Hard stainless steel Nibs
• Low internal resistance
• Anti Oxidation
• Measure Microscopic components with high accuracy
• High / Low Temperature resistant
• Cable Length 90cm
• Cat III 1000v 20A

The post High Precision Multimeter Probes 20A Fine Tip appeared first on ElectroFixit.

The grinding pen is most useful for PCB track repairs, it can be used to remove the top layer of solder mask on a track, if it was required to solder a pad strip onto it to fix say a lifted track pad.

It also has its uses for cutting down into multi layer boards for fixing broken tracks on the inner layers. Many graphics cards have upto 14 layers, and a common problem is a crack near the PCIe connector, resulting in some of the inner track having a break in them.By using the MaAnt D2 Grinding Pen each layer is cut away to reveal the broken track so it can be bridged with very fine wire, solder mask is then used to fill that bottom layer, and then the next layers track is fixed repeating the process to the top layer.

MaAnt D2 Grinding Pen Specs:

• Choose from 3 speeds using button
• Insert and remove bits without unscrewing nut.
• Long battery life.
• Overload protection
• Powerful motor to cater for all kinds of jobs
• Smart display
• USB-C fast charging
• Automatic Shut Off When Fully Charged
• Temperature control protection
• Over pressure protection
• Overcurrent protection
• Charge and discharge protection
• Light weight body
• Pen is usable while charging

The post MaAnt D2 Grinding Pen appeared first on ElectroFixit.

With infrared and visible lenses,the temperature measurement range is -15 to 550 °C making it easier to find adnormal temperature points. The high brightness illuminator adopts a new generation of sensor modules to ensure excellent infrared resolution and rich colour palette modes.

A SD card can be inserted to store images and transfer over to a PC for analysis.

The UNI-T UTi260B Thermal Image Camera makes PCB fault finding a quick and easy process, by pin pointing shorted faulty components.

Specifications

The post UNI-T UTi260B Thermal Image Camera appeared first on ElectroFixit.

The Atten ST-862D is supplied with stand and 4 different sized nozzles, catering for various sized components.

Product Features

• Power: 1000W
• Input voltage: 230VAC
• Temperature range: 100 to 480°C
• Comes with 4 nozzles
• Temperature unite switching function
• Temperature locking and timed work function
• MCU controlled temperature calibration and compensation for constant operation
• Strong air volume with brushless fan
• Easy to replace with pluggable heater
• Auto-sleep function
• Complete with UK plug

The post Atten ST-862D Rework Station appeared first on ElectroFixit.

AMTECH NC-559-V3-TF flux is a Universal no-clean tacky solder flux used for all soldering work. Clear residue evaporates with hot air and doesn’t short components.

V3 is the most recent no-clean formulation combining the power of 559-series into a single universal REACH-compliant chemical material with optical UV-tracer and pleasant non-chemical scent. Makes soldering incredibly easy and fun , it is also non-harming to the environment or human health.

Clear residue can be easily removed with hot air, foam swab and basic Solvents, it is also non-corrosive.

Storage and Handling

STIRRI-V3-TF flux should be stored at room temperature (20-25°C). As a result refrigeration is not necessary and will not extend product shelf life.
If the material has been refrigerated – consider 3-4 hours at room temperature to fully normalize.
Syringes and cartridges are best stored vertically with tip pointing down.
Properly stored tacky flux has up to 24-month shelf life, as a result you can hold larger stock.

Safety Notice

This product is designed for a professional audience. The information contained herein is based on technical data that we believe to be reliable and is intended for use by persons having relevant skills at their own risk, all safety data should be read before use.

Cleaning

“No-clean” fluxes are easily removed using a range of Solvents in ultrasonic devices or using commercially available flux residue removers, as a result the PCB looks clean.

The post AMTECH NC-559-V3-TF Flux 10cc appeared first on ElectroFixit.