Truma Ultraheat PCB Repair Service reference S3002 PCB/Module.
If your caravans Truma Ultraheat only works on one or two heat settings, or is totally dead when connected to the 240V AC supply then this Truma Ultraheat PCB repair will save the cost of buying a new unit.
The original components used on the PCB tend to have a high failure rate. This is possibly because they are under rated or low quality components are used in its manufacture. We use high quality higher rated components on all repairs, thus avoiding future failures and cost.
On replacement of the faulty component the device is then fully tested, making sure there are no other faults. After fully testing the device is shipped back to you using a first class tracked courier service.
The PCB is easy to remove from the rear of the heater located under a white plastic cover. Once you have removed the PCB ship it to us and we aim to repair same day.
Once you have completed the checkout process we will send you an email given you instructions and shipping address to send the unit.
List of Repairs
- Dead no heat output.
- Broken connector
- Broken Screw Terminal Blocks
- Heating stuck ON or OFF
- Faulty Relays Replacement
- Intermittent Power Loss
