The Geforce RTX 4090 has been plagued by the melting of its 12V power connector (12HPWR). The heating of the connector has been put down to bad contact between the socket from PSU and the cards connector.

With this repair we replace the damaged connector with a new high quality one.

The Geforce RTX 4090 Founders Edition is also plagued with power connector issues. The connector on these models appear to bend and break if the PSU plug is push into to hard.

The post RTX 4090 Melted Connector Repair appeared first on ElectroFixit.

Includes:

• A – Philips
• B – Tri Point
• C – Pentalobe
• D – Pinhead Philips
• E – T2 Torx

Manufacturer: QianLi

The post QianLi Mega Idea iFlying 2D Screwdriver Set appeared first on ElectroFixit.

Heavy Duty 10w UV light Cures Solder mask rapidly for PCB repair.

Industrial high quality build 10W high intensity UV Curing light that can cure solder mask in 6 seconds. This Boerui UV Lamp features a Shadow less Ultra Violet light and is built from thick Aluminium steel with an LED 395NM lamp.

     UV Lamp Specs:

• Power button on top for easy access
• Handsfree operation. Set it over PCB and leave it.
• Powered Via USB. No batteries needed.
• Stand by mode with light blue Light

The post Heavy Duty 10w UV light appeared first on ElectroFixit.

If your Samsung American Fridge Freezer no longer runs cold, or is totally dead when connected to the 240V AC supply then this Samsung American Fridge Freezer PCB Repair will save the cost of buying a new unit.

The original components used on the PCB tend to have a high failure rate. This is possibly because they are under rated or low quality components are used in its manufacture. We use high quality higher rated components on all repairs, thus avoiding future failures and cost.

On replacement of the faulty component the device is then fully tested, making sure there are no other faults. After fully testing the device is shipped back to you using a first class tracked courier service.

The PCB is easy to remove from  the fridge freezer located normally on the top panel. Once you have removed the PCB ship it to us and we aim to repair same day.

Once you have completed the checkout process we will send you an email given you instructions and shipping address to send the unit.

List of Repairs

• Dead no voltage output.
• Broken connectors
• Broken Screw Terminal Blocks
• Bad solder joints on PCB
• Faulty capacitors causing intermittent power loss
• Intermittent Power Loss

The post Samsung American Fridge Freezer PCB Repair appeared first on ElectroFixit.

If your Nintendo Switch Lite LCD no longer displays an image or there are horizontal or vertical lines showing this repair will have it like new again.

For a quick and professional repair, just send your device to us. We have carried out many repairs on these consoles and offer a one day turn around on most of the repairs we carry out.

Firstly, it’s important to note that the price includes all parts, and labour. You only need to pay for return shipping at checkout. Once you’ve completed the checkout process, you can then send your device to the address provided in your booking repair email. Upon your consoles arrival, we book it onto our system, which allows us to keep you updated on the progress of your repair. After booking your console onto our system, we proceed to conduct a thorough inspection and perform any necessary diagnostics before replacing the LCD.

On replacement of the LCD panel the device is then fully tested, making sure there are no other faults. After fully testing the device is shipped back to you using a first class tracked courier service.

Please see below for other faults that we repair on the Nintendo Switch Lite. We also carry out repair on many makes of Games Console, including PS5 and Microsoft Xbox.

List of Other Nintendo Repairs

• Replace LCD Display.
• Replace faulty touch screen digitizer
• Broken connectors
• USB port replacement
• Joy stick replacement
• Motherboard Repair
• Battery Replacement
• Fan Replacement

The post Nintendo Switch Lite LCD Repair appeared first on ElectroFixit.

If your caravans Truma Ultraheat only works on one or two heat settings, or is totally dead when connected to the 240V AC supply then this Truma Ultraheat PCB repair will save the cost of buying a new unit.

The original components used on the PCB tend to have a high failure rate. This is possibly because they are under rated or low quality components are used in its manufacture. We use high quality higher rated components on all repairs, thus avoiding future failures and cost.

On replacement of the faulty component the device is then fully tested, making sure there are no other faults. After fully testing the device is shipped back to you using a first class tracked courier service.

The PCB is easy to remove from  the rear of the heater located under a white plastic cover. Once you have removed the PCB ship it to us and we aim to repair same day.

Once you have completed the checkout process we will send you an email given you instructions and shipping address to send the unit.

List of Repairs

• Dead no heat output.
• Broken connector
• Broken Screw Terminal Blocks
• Heating stuck ON or OFF
• Faulty Relays Replacement
• Intermittent Power Loss

The post Truma Ultraheat PCB Repair appeared first on ElectroFixit.

Fine Tip Multimeter Probes that make light work of taking measurements on ultra small SMD components.

• Made from high quality Non Slip Ergonomic PVC Handle.
• Flexible PVC wire No Knots.
• Super fine and extra hard Gold needles for ultra precise measurements.
• Hard stainless steel Nibs
• Low internal resistance
• Anti Oxidation
• Measure Microscopic components with high accuracy
• High / Low Temperature resistant
• Cable Length 90cm
• Cat III 1000v 20A

The post High Precision Multimeter Probes 20A Fine Tip appeared first on ElectroFixit.

Does your Google Nest Heat Link thermostat  no longer powers up, or the connector has broken ?

For a quick and professional Nest Heat Link Repair, just send your device to us. We have carried out many repairs on these devices and offer a one day turn around on most of the repairs we carry out.

Firstly, it’s important to note that the price includes diagnoses, parts, and labour. You only need to pay for return shipping at checkout. Once you’ve completed the checkout process, you can then send your device to the address provided in your booking repair email. You can send us the whole device or just the PCB. Upon your device’s arrival, we book it onto our system, which allows us to keep you updated on the progress of your repair. After booking your device onto our system, we proceed to conduct a thorough inspection and perform any necessary diagnostics to identify the faulty component.

On replacement of the faulty component the device is then fully tested, making sure there are no other faults. After fully testing the device is shipped back to you using a first class tracked courier service.

List of Repairs

• Dead no power light showing.
• Broken USB connector
• Broken Screw Terminal Blocks
• Heating stuck ON or OFF
• Hot Water stuck ON or OFF
• Faulty Relays Replacement
• No Signal
• Intermittent Power Loss

The post Nest Heat Link Repair appeared first on ElectroFixit.

Does your laptop no longer charge or the charger plug will no longer fit into the socket ?

This laptop charger connector repair involves removing the faulty charge connector from the motherboard and replacing it with a new connector.We perform a full test making sure the laptop charges as it did from new.

The laptop charger socket can easly be accidently detached from the motherboard,this normally occurs when force is applied in a downward or upward direction. As a result the socket breaks of the motherboard. This causes the solder joints on the mother board to break, causing the socket to become loose and breaking the connection from charger to motherboard.

There are many types of connectors used on the laptops, some being more difficult to replace than others, normally the whole motherboard needs removing to carry out repair. Quite a bit of heat is required to remove the damaged connector.

At ElectroFixIT we carry a large stock of the connectors required to complete this repair.

Connector Types Replaced

• Jack plug sockets
• USB Type A
• USB Type C

Laptop Makes Repaired

• Lenovo
  • ThinkPad
  • Flex 10
  • IdeaPad Flex
  • Lenovo 3000
  • IdeaPad
  • Legion
  • ThinkBook
  • Yoga
  • Yoga 2 Pro
• HP
  • EliteBook
  • Envy
  • Pavilion
  • ProBook
  • Essential
• Dell
• Macbook

The post Laptop Charger Connector Repair appeared first on ElectroFixit.

On finding the fault we will then inform you of the full cost of the repair including any parts that may be required.If you wish not to commence with the repair there is nothing extra to pay. You only pay for the laptop diagnostics fee and return shipping.

You have the option for us to use the laptop for donor parts, in which case we will refund you the full return shipping cost.

List of Repairs

• Replace faulty charge connectors
• Replace faulty USB connectors
• Replace broken screens including LCD panel and digitizer if fitted
• Water damage repairs on motherboard and keyboard
• Repair faulty power components on motherboard
• Battery Replacement

The post Laptop Diagnostics appeared first on ElectroFixit.